Whole DALI dimmable led drivers Series  :

ANYSOAR DALI series dimmable LED driver, are designed to work with a wide range of DALI dimmer/ DALI system, such as LUTRON, PHILPS and other mainstream brands. Conform to DALI protocol IEC 62386. The driver provide smooth and no flicker 0-100% full dimming range and stepless dimming performance.

10W-200W DALI dimmable led driver.
Constant Voltage Design :   12V/24V output voltage and 10W-200W power for constant voltage dimmable driver.

Constant Current Design : 0-6500ma output current and 10W-200W power for constant current dimmable driver.

IP20 and IP67 Design

Dimming :

Minimum brightness: 0.1%

Full dimming range: 0-100%
Continuous, smooth

Reliable solution

Flicker-free

Series Outputs :

Output Power: 60W - 200W

Output Voltage: 12VDC , 24VDC

Input：

Voltage Range  :  100-265VAC       127~370VDC

Frequency Range: 47~63Hz

Protection:

Over Current :  Constant current limiting, recovers automatically after fault condition

Over Voltage :  Shut down and latch off o/p voltage, re-power on to recover

Over Temperature : Shut down o/p voltage, re-power on to recover

Environment :

Working Temperature: -30 ~ +70℃

Woring Humidity : 20 ~ 90% RH non-condensing

Storage Temperature, Humidity : -40 ~ +80℃ , 10 ~ 95% RH

Safety :

Safety Standards : UL62368-1 EAC TP TC 004 , IEC/EN62368-1,IP67  approved

Withstand Voltage : I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC

Isolation Resistance : I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH

EMC Emission :  Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020

EMC Immunity : Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level (surge 6KV), criteria A, EAC TP TC 020

Others:

MTBF :  50Khrs min.      MIL-HDBK-217F (25℃ )